QLS-H20 Промышленное оборудование для производства водорода высокой производительности

Технические характеристики продукта

Параметры продукта

Производство водорода: 20 Нм³/ч

Диапазон производства водорода: Регулируется от 0 до 100%

Давление производства водорода: регулируется от 0 до 3 МПа

Чистота водорода: 99,9995%

Точка росы водорода: -70°C

The SPE electrodes, as the core of the product, are highly active catalytic electrode with nearly zero distance between the electrodes, which is formed by integrating composite catalyst with and ion membrane with high electrolytic efficiency.

The other key parts are all produced by use of top-grade engineering plastics dies with superior quality. With perfect electric control system, designs of the generators are advanced with reliable quality, high automaticity, extremely pure generated hydrogen, huge output, the models and specifications of the generators are complete, and the generators are widely used.

Принцип работы

Electrolytic water meeting the requirements (With electrical resistivity >1MΩ / cm, and deionized or redistilled water in electronic and analysis industries can be used for this purpose. ), after being put into the anode chamber of electrolytic cell, when power is switched on, will be decomposed at once at the anode: 2H2 O = 4H++ 2O-2.

The decomposed negative oxyanion (O-2) will immediately release electron to form oxygen (O2), which will then be discharged from the anode chamber, with some water, into the water tank. The water can be used circularly, and oxygen will be discharged from the small hole of the top cover of the water tank into the atmosphere.

Протон водорода в форме акваиона (H+XH₂O) под действием силы электрического поля через ионную мембрану ТПЭ поступает на катод, где поглощает электрон, образуя водород, который затем выводится из катодной камеры в газоводяной сепаратор, где удаляется большая часть воды, привнесённой им из электролитической ячейки. Водород с небольшим содержанием воды поглощается влагой в эксикаторе, достигая чистоты 99,999 1TP₂T и выше.

Приложение

1. Power station cooling systems.

2. Hydrogenation, restoring protection, metal smelting and heat treatment.

3. Under any circumstance that needing large and ultra pure hydrogen gas.

4. Hydrogen stations.

Power Plant

Hydrogen is used as a refrigerant, and power plants must maintain optimal gas purity and pressure inside the generator casing to ensure power generation efficiency, operational safety, and equipment reliability.

Semiconductor Manufacture

Hydrogen generators used to protect and cooling semiconductor materials, purify process gases, and provide high-purity hydrogen gas as a reducing agent for processes such as copper oxide annealing and silicone film deposition.

Technology Advantages

1. SPE technology—Solid Polymer Electrolyte.

2. The SPE electrodes, as the core of the product, are highly active catalytic electrode with nearly zero distance between the electrodes, which is formed by integrating composite catalyst with ion membrane with high electrolytic efficiency.

3. Plural-electrode and multiunit electrolysis cell structure. Excellent chemical technological process properties of heat and mass transfer,Electrolysis of pure water (no adding alkali) to produce high purity (99.999%/99.9995%) hydrogen with no corrosion and pollution.

4. Voltage of cell is low, electronic resistance in the electrolysis cell is little, could greatly saving energy. Circle time for changing desiccants is long.

5. Power consumption is less, electrolysis is efficient.

6. Other parts of the generator are all produced by top-grade engineering plastics with superior quality.

7. Perfect electric control system. Stop working in emergency automatically.

8. Hydrogen huge output, models are complete. Widely used in many industries.